- Početna
- Novosti
- Merenje električnih veličina
- Novosti - merenje električnih veličina
- Multimetri
- Miliommetri
- Kalibratori
- Kvalitet mrežnog napona, analiza mreža
- Analizatori poremećaja snage i analizatori kvaliteta napona
- Multifunkcionalni merači snage (Power Meters)
- Instrumenti za ispitivanje električnih instalacija
- Merila otpora izolacije
- Merila otpora uzemljenja
- Detektori napona
- Ispitivanje bezbednosti medicinskih elektr.uredjaja
- Ispitivanje bezbednosti mašina
- Strujna klešta
- Izvori napajanja
- Fotonaponski (solarni) sistemi
- VN ispitivanja transformatora
- Merenje osvetljaja i luminanse
- Merenje buke
- Termovizijske kamere
- Merenje ultrazvukom
- Merni pretvarači
- Merenje vibracija
- Merenje mikroklime
- Procesni kalibratori
- Merenje prašine
- Merenje elektromagnetnog polja
- Lokatori cevi i kablova
- Merenje α, β, γ, x zračenja
- Analizatori dimnih gasova
- Servis
- Kontakt
DUSPOL ® analog 1000
Voltage Tester with Moving Coil Level Indicator
Suitable for electrical engineering, industry, maintenance and service (troubleshooting)
- Voltage from 12 - 1000 V AC/DC (LED / moving coil)
- Display levels: 12, 24, 50, 120, 230, 400, 690, 1000 V AC/DC
- Phase sequence / phase test (LCD), polarity test (LED)
- Direct display without key acknowledgment (high impedance testing)
- Load switched via pushbutton (high impedance testing)
- Intentional tripping of the RCCB
- Vibration alarm in the tester handle
- IP65 protection (dust-proof / protected against water jets)
- Rugged housing design with rubberized handle
- Overvoltage category: CAT IV 600 V, CAT III 1000 V
- Safety - always and everywhere: no batteries required
- Tested and approved in accordance with DIN EN 61243-3, VDE 0682-401:2011-02
Technical Data | DUSPOL ® analog 1000 |
DUSPOL ® expert 1000 |
DUSPOL® digital 1000 |
Display | Moving coil / LED |
LED | LED / LCD |
Display levels | 12 - 1000 V AC/DC |
12 - 1000 V AC/DC |
1 - 1000 V AC/ 1200 V DC |
Frequency measuring range | - | - | 1 - 1000 Hz |
Acoustic and optical continuity test | - | Buzzer + LED 0 - 100 kΩ |
Buzzer + LED 0 - 100 kΩ |
Diode test |
- | Forward/ reverse direction |
0.3 - 2.0 V |
Resistance measuring range | - | - | 0.1 - 300 kΩ |
Phase sequence test | LCD (R symbol) | Green LEDs (right/left) | Green LEDs (right/left) |
Single-pole phase test | LCD (R symbol) | Red “flash” LED | Red “flash” LED |
Polarity test | LED (+/-) | LED (+/-) | LED (+/-) |
Broken wire detector | - | Yellow LED (blinking) | Yellow LED (blinking) |
Load switched via pushbutton |
IS = 600 mA (1000 V) | IS = 550 mA (1000 V) | IS = 550 mA (1000 V) |
30 mA RCCB tripping | |||
Vibration alarm | Yes | Yes | Yes |
Measuring point illumination | - | White LED | White LED |
Protection | IP65 | IP65 | IP65 |
Article number | M611D | M611E | M611F |
Slični proizvodi