IMR 1400CO

The combustion gas analyzer IMR1400CO is easy to use, compact and rugged.
Two CO-sensors are installed, one for low CO-measurements and one for high measurements.

This helps to get the best possible accuracy for different applications (e.g. wood fired applications).

Measured parameters:
Oxygen O2, Carbon monoxide CO in ppm, Carbon monoxide CO in Vol.%

Calculated parameters:
Losses, combustion efficiency, excess air, carbon dioxidde

The series IMR1400CO can also measure draft, soot and stack gas temperature.     
IMR Environmental Equipment - IMR 1400 CO

IMR 1400CO-Overview

• Rugged aluminum case with an additional compartment
• Sensors: O2 - CO - CO
• Illuminated and simultaneous display of 8 values
• 7 fuels are programmed while 5 more are programmable
• Engineering units:
  ppm, mg, mg(O2), mg/kWh
• Interface RS 232
• Memory for 200 measurements
• Battery status is shown on the display; 6 hrs
• High speed thermal printer that prints all values (incl. date and time)
• CO-solenoid valve to automaticall switch between the low and high CO-sensor
• Electronic controlled soot measurement
• 3 minute zero point calibration with self-check
• Gas sampling probe with heated handle; type K
• Combustion air probe
• Condensation trap with integrated filter
• Operating temperature 50°F..104°F (10°C..40°C)
• Storing temperature -4°F..122°F (-20°C..50°C)
• Power supply  230V/50Hz, 110V/60Hz, 12VDC

Technical data

PARAMETER	PRINCIPLE	RESOLUTION	ACCURACY	RANGE	1400 P
O2 Oxygen	Electro-chemical	0.1 Vol.%	± 0.2 %	0-20.9Vol. %
CO Carbon monoxide	Electro-chemical	1 ppm	Z	0-2,000 ppm
CO Carbon monoxide	Electro-chemical	1 ppm	Z	O-4.000 Vol.%
NO Nitric oxide	Electro-chemical	1 ppm	Z	0-2,000 ppm	optional
NO2 Nitric dioxide	Electro-chemical	1 ppm	Z	0- 100 ppm	optional
SO2 Sulfur dioxide	Electro-chemical	1 ppm	Z	0-4,000 ppm	optional
TG Gas temperature	NiCr-Ni thermocouple	1 K	± 2 %	-4°F..2192°F -20°C..1200°C
TA Air temperature	Semiconductor	1 K	± 0.5 K	4°F..248°F -20°C..120°C
P Draft	Solid state	0.004" H2O 0.01 hPa	± 2 %	-12"H2O/+20"H2O -30hPa/+50hPa
CO2 Carbon dioxide	Calculation	0.1 Vol.%	± 0.2 %	0- CO2 max
Combustion Efficiency / ETA	Calculation	1 %	± 0.5 %	0-99,9 %
Losses / qA	Calculation	1 %	± 0.5 %	0-99,9 %
Excess air / LAMBDA	Calculation	1 %	± 2 %	1,0-9,99
Soot	Filter paper

Other ranges are available upon request.
Z= 0-20% of the measuring range +/- 1% of the maximum value
Z= 21-100% of the measuring range +/- 5% of the displayed value.
4 sensors are the maximum for the IMR 1400 PS (4th sensor can be specified)

Specification

• Dimensions wxdxh: 16"(425mm) x 7"(185mm) x 11"(290mm)
• Weight: approx. 15lbs. (5.8kg)

IMR Environmental Equipment, Inc. reserves the right to adopt technical modifications without prior notice

Preuzmite prospekt proizvoda IMR 1400CO