- Početna
- Novosti
- Merenje električnih veličina
- Novosti - merenje električnih veličina
- Multimetri
- Miliommetri
- Kalibratori
- Kvalitet mrežnog napona, analiza mreža
- Analizatori poremećaja snage i analizatori kvaliteta napona
- Multifunkcionalni merači snage (Power Meters)
- Instrumenti za ispitivanje električnih instalacija
- Merila otpora izolacije
- Merila otpora uzemljenja
- Detektori napona
- Ispitivanje bezbednosti medicinskih elektr.uredjaja
- Ispitivanje bezbednosti mašina
- Strujna klešta
- Izvori napajanja
- Fotonaponski (solarni) sistemi
- VN ispitivanja transformatora
- Merenje osvetljaja i luminanse
- Merenje buke
- Termovizijske kamere
- Merenje ultrazvukom
- Merni pretvarači
- Merenje vibracija
- Merenje mikroklime
- Procesni kalibratori
- Merenje prašine
- Merenje elektromagnetnog polja
- Lokatori cevi i kablova
- Merenje α, β, γ, x zračenja
- Analizatori dimnih gasova
- Servis
- Kontakt
SSP 120...320
Lab Power Supplies, Computer Controlled, Load Independent Response Times
KONSTANTER SSP-120, 240 and 320 (Single-Output System Power Supplies) are single output, computer controlled laboratory power supplies for universal use in R&D, production and testing.
Our innovative BET circuit technology (bidirectional energy transformation) allows for practically load independent response times of less than 1 ms (< 4 ms for 80 V device).
The analog interface provides for monitor, auxiliary power and programmable signal outputs, as well as programmable trigger and setpoint inputs.
- Wide range of functions
- Comprehensive calibration report
- Minimal power loss
- Auto-ranging output with 120, 240 or 320 W
- Voltage and current regulated output
- Increased output power for brief intermittent periods
- Very short response time thanks to BET technology
- Dynamic sink mode operation
- Excellent dynamic control parameters
- Minimal residual ripple
- Output ON/OFF function
- Lockable control elements
- Master-slave operation with parallel or series connection
- Sequence controls for the generation of voltage and current sequences
- Protection against overvoltage, overcurrent and excessive temperature
- Calibration procedure for menu-driven balancing
- RS 232 interface (complete device operation) / analog interface
- Floating output terminals at front and rear panel
- Can be electrically and mechanically combined with multi-output devices
Options:
IEEE 488 interface
Driver software for LabVIEW, LabWindows and HP VEE
Designation | Power (W) |
Voltage (V) |
Current (A) |
Type | Article No. |
SSP 120-20 | 120 | 0-20 | 0-10 | 32 N 20 RU 10 P | K320A |
SSP 120-40 | 120 | 0-40 | 0-6 | 32 N 40 RU 6 P | K321A |
SSP 120-80 | 120 | 0-80 | 0-3 | 32 N 80 RU 3 P | K322A |
SSP 240-20 | 240 | 0-20 | 0-20 | 32 N 20 RU 20 P | K330A |
SSP 240-40 | 240 | 0-40 | 0-12 | 32 N 40 RU 12 P | K331A |
SSP 240-80 | 240 | 0-80 | 0-6 | 32 N 80 RU 6 P | K332A |
SSP 320-32 | 320 | 0-32 | 0-18 | 32 N 32 RU 18P | K334A |
Slični proizvodi