- Početna
- Novosti
- Merenje električnih veličina
- Novosti - merenje električnih veličina
- Multimetri
- Miliommetri
- Kalibratori
- Kvalitet mrežnog napona, analiza mreža
- Analizatori poremećaja snage i analizatori kvaliteta napona
- Multifunkcionalni merači snage (Power Meters)
- Instrumenti za ispitivanje električnih instalacija
- Merila otpora izolacije
- Merila otpora uzemljenja
- Detektori napona
- Ispitivanje bezbednosti medicinskih elektr.uredjaja
- Ispitivanje bezbednosti mašina
- Strujna klešta
- Izvori napajanja
- Fotonaponski (solarni) sistemi
- VN ispitivanja transformatora
- Merenje osvetljaja i luminanse
- Merenje buke
- Termovizijske kamere
- Merenje ultrazvukom
- Merni pretvarači
- Merenje vibracija
- Merenje mikroklime
- Procesni kalibratori
- Merenje prašine
- Merenje elektromagnetnog polja
- Lokatori cevi i kablova
- Merenje α, β, γ, x zračenja
- Analizatori dimnih gasova
- Servis
- Kontakt
SSP 500...3000
Lab Power Supplies, Computer Controlled
KONSTANTER SSP-500, 1000, 2000 and 3000
(Single-Output System Power Supplies)are single output, computer controlled laboratory power supplies for universal use in R&D, production and testing.
Special circuitry allows for jumping from 0 V to nominal voltage (and back again) under nominal load conditions within response times of less than 10 ms.
The analog interface provides for monitor and auxiliary outputs, as well as programmable trigger and setpoint inputs.
- Wide range of functions, minimal power loss
- Auto-ranging output with 500, 1000, 2000 or 3000 W
- Voltage and current regulated output
- Increased output power for brief intermittent periods
- Very short response times thanks to special circuitry
- Dynamic sink mode operation
- Excellent dynamic control parameters
- Minimal residual ripple
- Output ON/OFF function
- Lockable control elements
- Sequence controls for the generation of voltage and current sequences
- Master-slave operation with parallel or series connection
- Protection against overvoltage, overcurrent and excessive temperature
- Analog interface
- Output terminals at rear panel
Options:
RS 232 and IEEE 488 interfaces (with measurement value querying)
Driver software for LabVIEW, LabWindows and HP VEE
Designation | Power (W) |
Voltage (V) |
Current (A) |
Type | Article No. |
SSP 500-80 | 500 | 0-80 | 0-12.5 | 62 N 80 RU 12.5 P | K341A |
SSP 1000-52 | 1000 | 0-52 | 0-50 | 62 N 52 RU 50 P | K345A |
SSP 1000-80 | 1000 | 0-80 | 0-25 | 62 N 80 RU 25 P | K343A |
SSP 2000-52 | 2000 | 0-52 | 0-100 | 64 N 52 RU 100 P | K352A |
SSP 3000-80 | 3000 | 0-80 | 0-75 | 64 N 80 RU 75 P | K361A |
Slični proizvodi